The InterpCNC board is an axis controller wich permit to drive 4 axis in linear interpolation.

First developped for CNC machine, its performances and its fonctionnalities make it usable in several applications :

    Labeling machine,

    Assembly machine

    Pick and place machine...

With several thousands of InterpCNC V1.4 installed, this board became a referency in the axis controller world

In adition to the previous version functionaities, the new generation give :

•     Speed up to 60%,

•     Increased of buffer size for CNC application,

•     One power relay integrated on the board,

•     1 analog output 0/10V,

•     MODBUS RS485 interface for industrial application,

• Industrial quality connectors (un-plugable)

The doble Interface disposed by the InterpCNC (RS232/RS485) permit to use it by the PC pilot, but also to raccord it in the same time or independently (autonomic function) on an external controlling desk.

By using KYNON , you can automatize your process with a programation langage very easy.

With a RS485 connection and a MODBUS protocol, its integration in the industrial applications piloted by automates are extremly simplified.

Axis movements:

• linear displacement of an axis,

• linear interpolation 2, 3 ou 4 axis until 50KHz,

• automatic generation of the accelatation/decelaration profiles

• Circular interpolation 2 axis.

Functions :

• Origin istake by contact changing statement searching(origine machine)

• Position searching of a contact (touch probes)

• Immediate stopping or with an entry activation ramp

Inputs/Outputs :

• 10 protected and filtred inputs from 0 to 30V,

• 1 analog input (10 bits resolution ).

• 4 optoisolated outputs,

• 1 TTL output,

• 1 relay output 10A/250V

• 1 analog output 0/10V

• 8 TTL outputs for STEP/DIRECTION axis commands

Interface :

• 12 à 30VDC unregulated power supply (50mA),

• RS232 communication or USB (with a conversion wire RS232/USB),

• RS485 communication with MODBUS protocol

• Led to visualise the progression of the inputs/outputs

Technical specifications :

• Size : 110 x 80mm

• Output motors pulses frequency: Up to 50KHz on the fourth axes

• Communication speed RS232 from 19200 to 256000b/s

• Communication speed RS485 from 19200 to 1Mb/s

• Parameters saved in EEPROM

Software compatibility :

• GALAAD

• KYNON

• Ninos