|
Multi-axes controller InterpCNC V2.1<br><span class="smallText">[ICNC21]</span>
The InterpCNC V2,1 board is a multi axes controller
It can be use to control 5 axes. Each axes can be drive indepentently (in automation application) or for linear interpolation (from 1 to 5 axes).
Based on high performances 32 bits CPU, this controller board is usable in numerical control application and also, in automation application were cost is critical..
Axes control Step/Direction outputs signals make the board conpatible with the full range of SOPROLEC motors drivers.
Two communication interface are available :
-
USB for high speed communication requirement in CNC application,
-
RS485 half duplex useful in industrial automation application
For CNC application, board is compatible with :
-
GALAAD (CAD/CAM/Machine control software fully integrated),
-
MACH 3 (Machine control based on GCODE),
Technical facts:
Power supply:
20 à 28VDC/250mA
Output spectifications :
Output 1 to 4 : 250V/10A relay
Output 5 to 8 : Open collector output 200mA/40V
Output 9 to 12 : Opto-isolateur 30mA/40V maxi par sortie
Output CK1 to CK5, D1 to D5 : TTL5V/20mA output for axes control
Inputs specification :
Inputs 1 to 16 : 0 to 32V. High level from 3,5V. Low pass Filter 1,5KHz.
Enable Input : Emmergency stop input.
Analogs Input/Output
4 Analog input 0/10V, 10bits resolution
2 Analog outputs 0 to 10V. 10 bit résolution
Communication interface
USB 2.0 High Speed,
RS485 half duplex, MODBUS RTU.
Performances :
Step output frequency : 200KHz
Command buffer size 32Ko (up to 1500 movement commande)
Drivers and user manual can be download here
|
