Kinco CV20-4T  Variable Frequency Drive  - Modbus - 380V Three-phase

380V Three-phase frequency converter
Switching frequency: 6 kHz
Output frequency: 0 - 300Hz
Mounting DIN rail or backplane
1 RS485 Modbus port
1 analog input -10~+10V, resolution 1/4000
4 optocoupled multifunction digital inputs, max. 200kHz
1 relay output, 250VAC - 2A, 30VDC - 1A
1 output 10V - 20mA

154.00 € Without Taxes 154.0 EUR 154.00 €

154.00 €

184.80 € 184.80 € with taxes

  • Drive power

This combination does not exist.

Product Documents

Catalogue CV20_FV20
Manuel Utilisation CV20

Variateur de fréquence Série CV20

Variateur de vitesse pour moteurs asynchrones

Alimentation Triphasé

Available versions : 2200W - 3700W

Switching frequency: 6 kHz

Output frequency : 0 - 300Hz

Mounting DIN rail or backplane

 

1 RS485 Modbus port

1 analog input -10~+10V, resolution 1/4000

4 optocoupled multifunction digital inputs, max. 200kHz

1 relay output, 250VAC - 2A, 30VDC - 1A

1 output 10V - 20mA

 

External dimensions: 

Width: 100 mm

Height: 151 mm

Depth: 128 mm

Weight: 1.3 kg

 

ItemsDescription
Input Rated Voltage and Frequency AC380V-440V 50Hz/60Hz
Allowable voltage range AC320V~460V - Voltage Tolerance < 3 % - Frequency +- 5 %
Output Rated Voltage 0~ Rated input voltage
Frequency 0Hz~300Hz
Overload capacity 150 % 1 mn – 180 % 1 s – 200 % 0.5 s
Control Characteristics Controle mode V/F control
Starting torque 0.5Hz 150% rated torque
Speed regulation range 1 : 100
Speed stabilizing acurracy +- 0.5%
Basic Functions Operation Command Operation Panel – Terminal – Communication Control – Support switching between these control channels
Starting mode Start from starting frequency – Brake first then start – Speed tracking
Stopping mode Dec-to-stop – Coast-to-stop – Dec-to-stop + DC injection braking
V/F pattern 4 patterns : 1 V/F curve mode set by user and 3 kind of torque derating modes
Acc/Dec curve Linear Acc/Dec – S curve Acc/Dec
Protection function Overcurrent – overvoltage – miss phase – under-voltage – overheat – over-load – short circuit and so on
Environnement Operating site Indoor - installed in the environnement free from direct sunlight – dust – corrosive gas – combustible gas – oil mist – steam and drip
Altitude Derated above 1000m – the rated output current shall be decreased by 10% for every rise of 1000m
Ambient temperature -10°C~40°C - derated at 40°C~50°C
Humidity 5%~95%RH – non-condensing
Vibration Less than 5.9m/s2 (0.6g)
Storage temperature -40°C~70°C
Structure Protection Class IP20
Cooling method Air cooling, with fan control
Installation method DIN-rail mounting and wall-mounting
Efficiency ≥ 93 %


Specifications

Drive power 750 W or 2200 W or 3700 W
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.