InterpCNC 2 - 3 axes

Tiny PLC, axis controller

3 axes digital control

Features:

Power supply:

• External from 12 to 28VDC / 150mA
• Or from USB (if analog IO features are not required).

 
Outputs:

• OUT1 to OU3 : Optocoupled output 50V/50mA,
• CK1 to CK3, D1 to D3 : TTL 5V/20mA maxi

Inputs:

• Input 1 to 6 : 0V to 32VDC, high level from 3.5V, programmable digital filter from 0 to 150ms,
• Input 7 to 10 : 0V to 32VDC, high level from 3.5V, programmable digital filter from 0 to 150ms,
• Note : Inputs are NPN and PNP compatibles.
• TTL input A and B for incremental encoder or dual high speed counter up to 75KHz,
• ENABLE input : Safe input to stop pulses outputs. 0 to 32V maxi. High level from 3.5V

Analog inputs/outputs:

• 2 analog inputs AI1 and AI2 : 0 to 10V. Impedance 1M, Resolution 10 bits.
• 2 analog outputs AO1 and AO2 : 0 to 10V. Resolution 10 bits.

Communication interfaces:

• USB 2.0 High Speed,
• RS485 half duplex, MODBUS RTU protocole
• RS485 DMX 512 protocole

Performances:

• Pulses output frequency up to 200KHz
• Buffer  32Ko (up to 1500 move commandes)

Compatibility:

• Labview (with VI released for USB or for MODBUS),
• Mach3,
• Galaad,
• MultiCN
• USB API is also available for your application.