ES-D508 closed loop servo driver 50V/8A

50V/8A closed loop servo motor driver
For use with 3 phase motors

99.00 € Without Taxes 99.0 EUR 99.00 €

99.00 €

118.80 € 118.80 € with taxes

  • Brand
  • Min. Voltage
  • Max. Voltage
  • Max. current
  • Resolution setting
  • Configurable
  • Current setting

This combination does not exist.

Product Documents

ES-D series manual
ES-D508 manual
Protuner ES manual
ProTuner ES software

Internal Reference: ES-D508

Closed Loop servo motors driver:

Advantages :

  • Closed loop => no lag or step loss
  • Low heating and low noise
  • Quick response without overshoot or jerk
  • High torque on acceleration and deceleration
  • Plug&play (no adjustment for the majority of applications) 

The Leadshine ES-D508 driver is a closed-loop stepper motor driver and therefore provides real-time position feedback with 3-phase stepper motors equipped with encoders (NEMA size 23). 

This solution combines the advantages of stepper motors and servo motors thanks to the management of encoders integrated into the motors. 

The control interface is similar to that of a classic stepper motor driver. Since the encoder is managed directly by the driver, it can return an error signal to you in the event of a mechanical blockage (configurable tolerance window). 

This solution therefore provides the positioning reliability of a servomotor but also great simplicity of implementation. 

The driver has presets for ES-M32309 and ES-M32320 motors. 

Unlike a traditional stepper solution, the current in the windings is not constant but is continuously adapted according to the load. Consequently, the heating is reduced and it is possible to very significantly increase the current from time to time to compensate for hard points on the movements.

 

Electrical Specifications (Tj = 25oC/77oF)

Parameters

ES-D508


Min

Typical

Max

Output current

0

-

8.0 (Peak)

A

Input voltage

20

36

50

VDC

Logic signal current

7

10

16

mA

Pulse input frequency

0

-

200

kHz

Isolation resistance

500

 

 

MO

 

Hybrid servo drives can be used as a replacement for traditional stepper motors to eliminate the risk of lost steps and increase the overall performance of your axes.



Accessories

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

Specifications

Brand Leadshine
Min. Voltage 20 V
Max. Voltage 50 V
Max. current 8 A
Resolution setting Tuning software
Configurable via RS232 cable
Current setting Tuning software
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.