M752  analog stepper driver

70V/5.2A stepper driver

69.90 € Without Taxes 69.9 EUR 69.90 €

69.90 €

83.88 € 83.88 € with taxes

  • Brand
  • Max. Voltage
  • Max. current
  • Resolution setting
  • Weight

This combination does not exist.

Product Documents

Manuel driver M752

Internal Reference: M752

  • High performance for a moderate cost
  • Power supply up to 75V, Peak current of 5.2A max
  • Automatic switch to reduced current mode (configurable) 
  • Can be used with 2 or 4 phase motors (unipolar or bipolar)
  • Opto-isolated input signals
  • Pulse frequency up to 300 KHz
  • 16 resolution configurable by DIP switches (up to 51200 steps/rev on a 200 step/rev motor)
  • Current adjustment by DIP switches (8 positions from 1A to 4.2A)
  • Configurable PULSE/DIRECTION or CW/CCW mode
  • Short circuit, over voltage and under voltage protection
  • Contained dimensions (118x75.5x33mm)
  • Pluggable connectors



Accessories

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

Specifications

Brand Leadshine
Max. Voltage 72 V
Max. current 5.2 A
Resolution setting DIP-switches
Weight 280 gr
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.