ES-DH2306  closed loop servo driver 230V/6A

Closed loop servo Driver 220/230 AC / 6A
For use with 3 phase servo motors

270.00 € Without Taxes 270.0 EUR 270.00 €

270.00 €

324.00 € 324.00 € with taxes

  • Brand
  • Min. Voltage
  • Max. Voltage
  • Max. current
  • Resolution setting
  • Configurable
  • Current setting

This combination does not exist.

Sur commande

Product Documents

ProTuner ES software
ProTuner manual
ES-DH driver manual
Datasheet ES-DH2306

Internal Reference: ES-DH2306

Closed Loop Servo Motors driver
Advantages :

  • Closed loop => no lag or step loss
  • Low heating and low noise
  • Quick response without overshoot or jerk
  • High torque on acceleration and deceleration
  • Plug&play (no adjustment for the majority of applications) 

The Leadshine ES-DH2306 driver is a new generation stepper motor driver.

It operates in a closed loop and therefore provides real-time position feedback with 3-phase stepper motors equipped with encoders (NEMA 34 and NEMA 42 size). 

This solution combines the advantages of stepper motors and servomotors thanks to the management of encoders integrated into the motors. 

The control interface is similar to that of a classic stepper motor driver. Since the encoder is managed directly by the driver, it can return an error signal to you in the event of a mechanical blockage (configurable tolerance window). 

This solution therefore provides the positioning reliability of a servomotor but also great simplicity of implementation. 

Unlike a traditional stepper solution, the current in the windings is not constant but is continuously adapted depending on the load. Consequently, the heating is reduced and it is possible to punctually increase the current very significantly to compensate for hard points on the movements.

 

Electrical Specifications (Tj = 25oC/77oF)

Parameters

ES-D808


Min

Typical

Max

Output current

0

-

6.0 (Peak)

A

Input voltage

150

-

230VAC

VDC

Logic signal current

7

10

16

mA

Pulse input frequency

0

-

200

kHz

Isolation resistance

500

 

 

MO

Hybrid servo drives can be used as a replacement for traditional stepper motors to eliminate the risk of lost steps and increase the overall performance of your axes.

Wiring:




Accessories

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

Specifications

Brand Leadshine
Min. Voltage 150 VAC
Max. Voltage 230 VAC
Max. current 6 A
Resolution setting Tuning software
Configurable via RS232 cable
Current setting Tuning software
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.