Plasma Cutting digital control pack: 5 axis CNC card + 24V power supply + GALAAD CFAO PRO + THC Amplifier-Isolator

Digital control pack for Plasma cutting:

​

Complete set including CAD/CAM/machine control software with 5-axis control card

The InterpCNC V2.2B also has a powerful PLCBasic language interpreter allowing the programming of embedded functions or the autonomous management of axis control/command applications.
The PLCBasic program is stored in Flash memory directly on the card and automatically executed when powered on.


The axis control interface in Step/Direction mode is compatible with the entire range of motors offered by the company SOPROLEC (step-by-step motorization, brushless motorization).

Two communication interfaces are available 

• USB for fast communication in CNC applications,
• RS485 MODBUS RTU for industrial applications or DMX512.

Compatibility with the following digital control software:

• Galaad CAO/FAO (PRO version in this offer)
  
• Mach3 and Mach4

Specifications :

Power :

• SOPROLEC power supply 24V SOP-2402
  

Specs of outputs:

• Outputs 1 to 4: Dry contact relay 250V/10A
• Outputs 5 to 12 : 24V PNP outputs 350mA (total)
  
• Outputs CK1 to CK4, D1 to D4: TTL output 5V/20mA max

Specs of inputs :

• Inputs 1 to 13: 0 to 32V max. High level from 3.5V. 1.5KHz filter.
• A TTL incremental encoder input or 2 fast counter inputs (connection of an MPG electronic handwheel).

Analog Inputs/Outputs:

• 4 Analog inputs AI1 to AI4: 0 to 10V. 1M impedance, 10 bit resolution.
• 2 analog outputs AO1 and AO2: 0 to 10V. 10 bit resolution.

Communications interfaces:

• USB 2.0 High Speed
• RS485 half duplex, protocol MODBUS RTU
• RS485 protocol DMX 512.

Performances :

• Frequency of motor control pulses: 200KHz
• 32 KB command buffer (i.e. up to 1500 movement commands)

Technical sheet:

• 12 to 28V power voltage
• 143 mm length
• 100 mm width
• USB communication
• RS232 Communication: no
• RS485 communication (Modbus RTU protocol)
• Incremental encoder input: 1
• Analog Outputs: 2 (0..10VDC)
• PLC functions: Yes
• Number of axes: 5
• Pulse frequency 200KHz
• Number of inputs 16
• Number of outputs 12
• Analog inputs: 2 (0..10VDC)

The board comes with a 1.8m USB cord.

Device engineered and made in France by SOPROLEC.

THC Amplifier-Isolator:

Interface module specially developed by SOPROLEC to measure the arc voltage of a plasma cutting generator.

This module brings together 3 functions for managing an automatic torch height control (THC) system:

• Galvanic isolation between the voltage coming from the generator (via the generator's integrated voltage divider) and the digital control,
• Filtering optimized to remove parasites,
• Applying an offset to the measured voltage to improve arc voltage measurement accuracy.

Combined with an InterpCNC V2 or V3 axis card and the GALAAD software, you will have a fully automated system for cutting height regulation, which ensures optimal cutting quality.

The function of this amp is to reduce the arc voltage for the analog input of the digital control card to a range of 0 to 10V, and thus obtain the best possible resolution.
Without offset, the input voltage range of the amp is by default 0 to 10V,
but can be adjusted for you in the workshop on request, with an offset value depending on the voltage range generated by your generator.

Thank you for specify when ordering, the desired offset setting according to the voltage range available on your generator after the divider.
Contact us if you do not know.

Example:
1V - > 0V
4V -> 10V
or
1V -> 0V
5V -> 10V