SMC60S-0040-30MBK-3LSU - 400W,3000PRM, small inertia, single 16bits magnetic encoder,with brake

Servomoteur brushless 3000rpm / 400W
Couple nominal 1.27Nm, Maxi 3.81Nm
Frein 24VDC par absence de tension

283.20 € Without Taxes 283.2 EUR 283.20 €

283.20 €

339.84 € 339.84 € with taxes

  • Brand
  • Torque
  • Power
  • Shaft diameter
  • Rotor inertia
  • Body length
  • Brake
  • Weight
  • Intensity
  • Frame size
  • Encoder type

This combination does not exist.

En cours de réapprovisionnement


Internal Reference: SMC60S-0040-30MBK-3LSU

Brushless servomotor 400W
with brake
Encoder type Weight (Kg) Length L(mm)
SMC60S-0040-30MBK-3LSU 16 bit single turn magnetoelectric encoder 2.1 147+-1.5
Flange (mm) 60
Shaft diameter (mm) 14
DC bus voltage (V) 300
Continuous operating performance Rated power 400 W
Nominal torque (Nm) 1.27
Nominal speed (Rpm) 3000
Rated current (A) 2.4
Maximum torque (Nm) 3.81
Max current (A) 7.2
Standstill torque (Nm) 1.4
Current at stop (A) 2.6
Winding resistance (ohm) 5.8
Winding inductance (mH) 11.5
Electrical time constant (ms) 1.98
Electrical time constant (ms) 1.3
Constant Reverse voltage (V/krpm) 34
Constant torque (Nm/A) 0.562
Motor moment of inertia (Kg.cm2) 0.409
Brake holding torque 1.3
Number of pole pairs 3
Maximum transient voltage du/dt (KV/us) 8
Insulation class F
Maximum radial force (N) 180
Maximum axial force (N) 90
Cooling Completely closed, uncooled
Protection sign IP65 for motor body, IP54 for axes
Environmental operating conditions -20°C ~ 40°C (non-freezing)
Humidity Below 90% RH (non-condensing)
Keep away from active and combustible gases, oil splashes and dust​
Altitude Max Altitude 4000m​




Accessories

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.


Specifications

Brand Kinco
Torque 1.27 Nm (3.81 Nm peak)
Power 400 W
Shaft diameter 14 mm
Rotor inertia 0.409 kg/cm2
Body length 147 mm ±1.5
Brake With
Weight 2.1 kg
Intensity 2.4 A (7.2 A max.)
Frame size 60 mm
Encoder type 16 bit single turn
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.