
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
- Send to a friend
Microstep driver with standalone speed profile generator.
This driver is suitable for applications where you need to drive a stepper motor with digital commands (ie : Run, direction).
Speed and accelereation can be adjust with internal potentiometer. Speed can be also control by using externanl potentiometer.
Electrical Specifications
Parameter |
Min |
Typical |
Max |
Unit |
Supply Voltage (DC) |
18 |
60 |
80 |
VDC |
Logic signal current |
0 |
- |
200 |
kHz |
Pulse input frequency |
7 |
10 |
16 |
mA |
Isolation resistance |
500 |
- |
- |
MΩ |
Parameters |
Specification |
Dead |
Resolution |
Min |
Max |
|
Analog Input |
0-5V Speed Mode |
0-5 V |
10 mV |
10 mV |
0 Rev/s |
25 ± 0.5 Rev/s |
External POT Mode |
20 mV |
|||||
Accel / Decel / Ramp Potentiometer |
0-25 turns |
10 mV |
10 mV |
0.5 Rev/s2 |
250 ± 1 Rev/s2 |
|
LoSpeed Potentiometer |
0-25 turns |
10 mV |
10 mV |
0 Rev/s |
5 ± 0.01 Rev/s |
|
HiSpeed Potentiometer |
0-25 turns |
10 mV |
10 mV |
0 Rev/s |
25 ± 0.5 Rev/s |
Cooling |
Natural or forced |
|
Operating Environment |
Environment |
Avoid dust, oil fog and corrosive gases |
Storage Temperature |
-20 °C - 65 °C (-4°F - 149 °F ) |
|
Ambient Temperature |
0°C- 50 °C (32 °F- 122°F) |
|
Humidity |
40%RH - 90%RH |
|
Operating Temperature (Heat Sink) |
70 °C (158 °F) Max |
|
Vibration |
10-55Hz, 0.15mm/s |
|
Storage Temperature |
-20 °C- 65 °C (-4 °F- 149 °F ) |
No customer reviews for the moment.